Spark plug wrench suggestion?

[fixkick]

any spark socket get it loose.
but use a rubber hose to pull it out or the snake grabber.
yes on intake but its a snap all that.

the ngk is BKR6ES
16mm (5/8")
any spark socket that size fits. im sure you have extensions and a universal joint is of no use.
with 4 valves this spot is only place it can go. dead center.


http://www.amazon.com/TEKTON-1785-8-Inch...lug+socket.

$2.49
http://www.harborfreight.com/58-in-high-...67792.html


and a free ruler all in one day...... lol

the rubber inside all spark sockets are short lived.
so i use a 1/4 id hose extract them and to start the treads, never use tools to start spark plugs. its soft alum. head. and do not over torque them.

i have a mag extractor, and a grabber, all 3 work.

seen on my tuneup page
this
http://www.fixkick.com/IGN_timing/25v6-2...81%29w.jpg

sold at harbor fright too. and many others.

torque spec is 21 foot lbs, tiny.

http://www.fixkick.com/specs/torque1.html

---

http://www.harborfreight.com/24-inch-2-i...94162.html


$3

can also get things dropped, no arms can fit..... its and very useful tool