05-11-2014, 07:33 AM
checking the whole loop every inch, even the 2 schrader valve cores for leaking? is first, then the cab evap last..
the front receiver/drier too, and its hi/lo switch for leaks?
here it is,but how to split the case , not removed, might be possible
http://www.fixkick.com/AirCond/96-97set/...lowups.pdf
page 13 , in fsm , see the words, most difficult in first line.....
http://www.acksfaq.com/96-FSM-v1-1b-pdf.htm
says, remove blower motor case
http://www.acksfaq.com/96-FSM-v1-1a-pdf.htm
again page 13. two number 13s in a row. luck is not our friend.
i hope its not there but something dumb like the hi/lo switch cracked or schraders, leaking.
the front receiver/drier too, and its hi/lo switch for leaks?
here it is,but how to split the case , not removed, might be possible
http://www.fixkick.com/AirCond/96-97set/...lowups.pdf
page 13 , in fsm , see the words, most difficult in first line.....
http://www.acksfaq.com/96-FSM-v1-1b-pdf.htm
says, remove blower motor case
http://www.acksfaq.com/96-FSM-v1-1a-pdf.htm
again page 13. two number 13s in a row. luck is not our friend.
i hope its not there but something dumb like the hi/lo switch cracked or schraders, leaking.
http://www.fixkick.com