the 3speed, box is simple box, kick down cable Is steel coaxal cable like motorcycle old hand brake or bicycle.brake.
it goes to the throttle, aka passing gear cable. if cut in half. but not cable stuck and pulled out of the box jammed
the shifting will all be fast, 1,2,3. passing, fast.
the cable fails 2 ways, rusted stuck out or in, or snapped stuck in or not. At the tranny end make sure not tuck out.(jammed)
the other connection is hose vacuum ,called vacuum modulator, Color coded for 1.6L and shifts by engine LOAD< up hills it down shifts (or delays up shifts)
and there are 2 major elect connections, one for TCC torque converter lock up clutch solenoid connector on box.
and then the PRNDL switch. on the side of the box.
the PRNDL , allows cranking in P and N, and R turns or backup lamps. wired that way,
will its all here
http://fixkick.com/slush-pump#Kickdown
so are you taking TCC or PRNDL
1.6L 8valve engine, TBI injected, not MPI
https://www.ebay.com/sch/i.html?_from=R4...s=2&_dmd=2
it goes to the throttle, aka passing gear cable. if cut in half. but not cable stuck and pulled out of the box jammed
the shifting will all be fast, 1,2,3. passing, fast.
the cable fails 2 ways, rusted stuck out or in, or snapped stuck in or not. At the tranny end make sure not tuck out.(jammed)
the other connection is hose vacuum ,called vacuum modulator, Color coded for 1.6L and shifts by engine LOAD< up hills it down shifts (or delays up shifts)
and there are 2 major elect connections, one for TCC torque converter lock up clutch solenoid connector on box.
and then the PRNDL switch. on the side of the box.
the PRNDL , allows cranking in P and N, and R turns or backup lamps. wired that way,
will its all here
http://fixkick.com/slush-pump#Kickdown
so are you taking TCC or PRNDL
1.6L 8valve engine, TBI injected, not MPI
https://www.ebay.com/sch/i.html?_from=R4...s=2&_dmd=2
http://www.fixkick.com