05-04-2014, 08:41 AM
Original DTC p0443 but purge valve passed checks on alldata so naturally I started giving the cannister the dirty looks. Turns out you were right I had some loose hose conections and I replaced the gas cap one from NAPA OE style. After that ran scan tool again no more p0443, but a new code was waiting for me P0340 the camshaft position sensor. Now I'm a little upset but glad I can get the sensor within 24hrs. Original symptoms were as follows hesitation and a couple of stalls at idle and of course a mil lamp. Throughout the coure of this my scan tool a P.O.S. i got from a pawn shop some years back crapped out on me. So I've been using my buddys cheap code scanner until I get this resolved.