Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wiring Help!
#1
Hey guys

Recently got myself a 1992 geo tracker, 4WD, 2 door, 8 valve TBI. NO AC. 

There are quite a bit of modifications I am addressing. The previous owner connected an alarm system under the drivers dash via the ECU wiring. 
Seems that the main ignition wire (black and red) has been wired through the alarm system, as well as a black wire (assuming this is ground). 
Im going to remove the alarm system. 

When I looked under the drivers side dash, I noticed some ports and connecters that dont have anything plugged in. 
I wanted to make sure that this is normal? And if anything is missing?

Can somoene take a look at these images and let me know? 

The first image shows a black connecter (12 pins) and a white connecter (not sure how many pins) right next to eachother. 
Should anything be plugged into these? 

The second image is part of the wiring harness under drivers side dash. There is an orange wire (with small blue marks on it) that isnt connected to anything. Does anyone know what this is for? 

Here are the images: 
https://imgur.com/a/WMtBs3F


Thank you!!
Reply


Messages In This Thread
Wiring Help! - by sina27 - 10-13-2021, 03:44 AM
RE: Wiring Help! - by fixkick - 10-13-2021, 05:08 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)