Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Need some help
#13
Thanks !

Okay
SO - the BECK 1430688 thermostat I ordered will work for BOTH the 1mm and 4mm lip models, correct?
To determine which GASKET I use with this thermostat, I should measure the lip - if 4mm lip, I will use the rubber O-RING. If 1mm lip, I will use the paper gasket.
 (I ordered both gasket and o-ring from rock auto). 

So your explanation of why the CAT is necessary for the EGR to work properly might explain why the car idles rough. Hopefully the CAT installation will help this issue. 

Thanks for the help Kick!

Reply


Messages In This Thread
Need some help - by sina27 - 09-26-2021, 12:59 PM
RE: Need some help - by fixkick - 09-26-2021, 09:05 PM
RE: Need some help - by fixkick - 09-26-2021, 09:16 PM
RE: Need some help - by fixkick - 09-26-2021, 09:25 PM
RE: Need some help - by fixkick - 09-26-2021, 09:31 PM
RE: Need some help - by sina27 - 09-27-2021, 06:40 AM
RE: Need some help - by fixkick - 09-27-2021, 07:13 AM
RE: Need some help - by sina27 - 09-30-2021, 02:24 AM
RE: Need some help - by fixkick - 09-30-2021, 03:39 AM
RE: Need some help - by fixkick - 09-30-2021, 04:26 AM
RE: Need some help - by sina27 - 10-05-2021, 04:02 AM
RE: Need some help - by fixkick - 10-05-2021, 09:59 AM
RE: Need some help - by sina27 - 10-06-2021, 02:23 AM
RE: Need some help - by fixkick - 10-06-2021, 02:40 AM
RE: Need some help - by sina27 - 10-06-2021, 11:10 AM
RE: Need some help - by fixkick - 10-07-2021, 02:31 AM
RE: Need some help - by sina27 - 10-07-2021, 03:21 AM
RE: Need some help - by fixkick - 10-06-2021, 02:45 AM
RE: Need some help - by sina27 - 10-06-2021, 02:51 AM
RE: Need some help - by sina27 - 10-06-2021, 11:02 AM
RE: Need some help - by fixkick - 10-07-2021, 03:45 AM
RE: Need some help - by sina27 - 10-08-2021, 09:36 AM
RE: Need some help - by fixkick - 10-08-2021, 10:48 AM
RE: Need some help - by sina27 - 10-09-2021, 02:59 AM
RE: Need some help - by fixkick - 10-11-2021, 04:31 AM

Forum Jump:


Users browsing this thread: 6 Guest(s)