(09-12-2021, 03:28 AM)fixkick Wrote: oops/.The pivot is there. Just looked at pedal arm again and, with clutch pedal .2" above brake pedal, there is 1- 1.5 " of cable between the arm and the metal sheath the cable comes out of. I can push the clutch pedal to floor, releasing clutch, with hands from under dash position so is not too hard. Triple checked everything I can think of and all looks good until I try to adjust nut #19 further on. Cable worked for me before BUT obviously someone had issues before I bought it. It is possible the pedal was set higher originally as I don't remember checking it when I first checked for slack. Had just bought it and didn't have a manual or procedure, just ensured there was some slack in cable. I am going to need it in a week for a few days so I'm thinking of moving it on the spline at the clutch release lever one tooth and correct it when a new cable comes. I guess it is possible that cable is now catching inside, under tension, but it sure doesn't feel like it.
are you missing a key part seen as ID #18
Is there a burning reason to NOT adjust at clutch arm?