Vitara 1991 brake caliber bracket

[fixkick]

Car Info:
- 1991 Vitara MT, 2 door, G16a, 4wd.
- 242000km / 150 000 miles
 - Plate in engine compartment.
  - TYPE: ETA01V
  - LAK625K17 (SWE, car has actually been sold in neighbor country FIN)
 - No AC


Hi fixkick. I had earlier post about brake booster replacement and after 1 month of googling found parts and its done.


Found out that right front wheel brake caliber is badly attached. Pins going from brake caliber bracket to brace caliber have loose fitting and it seems I need new brake caliber + bracket.

Would you know where to find part number for the bracket or the bracket it self. Looks like really rare part in EU.

Thanks in advance.

market 17 car.
ok lets do the drawing first, parts list and graphics.
R/F  caliper bracket.
are you talking about a whole new or rebuilt caliper? or that which it mounts upon.?

the  caliper mounts to the spindle/front axle assy.

the whole thing is R/T
55101- <prefix
suffix by vin serial

60a02 first year.
60A30, at vin -130232~  (means and higher)


LAK625k17
L= metal top.
A= 3doors
k= 4 seats
62, = 8valves.
5=JLX
k= type 1 engine,
17 = market code.

and parts are varied . are also by serials,  just like brakes are.

the 91 here (2door) not 4door uses 65101-60a02 same part.
the 4door is more heavy car uses totally different front calipers.

raybestos has them here, even rebuilt 91 2door.  (I love there quality used many)

Part Number: FRC1031
https://www.brakepartsinc.com/raybestos/...earch.html



https://www.brakepartsinc.com/raybestos/...er=FRC1031