10-06-2020, 06:19 AM
more clear is cut them both and join them that way DRL does not burn more.'
I can not see which end is burned.
but also can pull the module out and just jump the 2 pins 1and 2. and fixed, assuming that end is not burned up .
the high beams work now and flasher;.
1 to 2 jump makes Lows now like no DRL car.
how to do this depends on burn damage, there.
I can not see which end is burned.
but also can pull the module out and just jump the 2 pins 1and 2. and fixed, assuming that end is not burned up .
the high beams work now and flasher;.
1 to 2 jump makes Lows now like no DRL car.
how to do this depends on burn damage, there.
http://www.fixkick.com