(09-29-2020, 04:26 AM)JCTracker Wrote:sure. but click my links first.(09-29-2020, 03:55 AM)fixkick Wrote:(09-29-2020, 03:53 AM)fixkick Wrote: Thanks for the quick reply and recommendations. I'll be sure to use the new one as a template to be used for making duplicate gaskets for future use.
Can you please clarify the statement below.....................
"rule #2 the must be blocked holes.x5"
Was there a "rule #1" that I missed or are you saying that "Rule #2 is that all 5 holes must be blocked by the gasket"?
OK i will for you
see bottom of TB
see words, must be blocked, these 5 holes just like the suzuki was on all.
those 5 holes are what are called DRILLINGS. and must be blocked, just like carbs did for 80+ years.
they drill the body to get port paths made deep inside and then use the gasket to block those drilling's.
![[Image: 90-TB-bottom1.jpg]](https://fixkick.com/IDLE-AIR/Slide_Show/images/90-TB-bottom1.jpg)
just use the slotted ARC gasket, it works every time.
http://www.fixkick.com