06-25-2020, 10:38 PM
on that spline, one can put a very thin coating of brake grease there (this grease is super high temp grease black coded) $1 packets at autostore check out counter (hint)
that keeps spline from rusting and sticking and making clutch action not stiff,.
the bell clutch lever to the T.out bearing shaft has 2 plastic bushings that can fail this old.
but is simple to see at inspections.
the 2 man , 1inch rule fails, zero slack, is may answers.
that keeps spline from rusting and sticking and making clutch action not stiff,.
the bell clutch lever to the T.out bearing shaft has 2 plastic bushings that can fail this old.
but is simple to see at inspections.
the 2 man , 1inch rule fails, zero slack, is may answers.
http://www.fixkick.com