[quote pid='12060' dateline='1567260673']
YOU NEVER READ THE MANUAL, IT TELLS YOU TEMPS RUN 215F OR A BIT MORE.
AGAIN THIS IS A REVERSE FLOW COOLANT SYSTEM UNLIKE THE G16.
Themermost is at the front of engine, in the pump housing and sucks cold water.
the ECT is on the rear of the head, NOT SAME place as thermostat so the ECT reads hotter than the themostat by DESIGN
please end the witch hunts on themostat, now.
[/quote]
It stamps 180F / 82C Thermostat only on the box. On the thermostat itself, it just reads 50MM. The old thermostat does not say anything either, it must be the aftermarket one as well.
Does the rockauto ship me the wrong thermostat??
People say only the OEM has stamp of the specific temperatures on their thermostats, the aftermarket ones do not, is it true??( no human on earth can answer how all thermostat are packaged or stamped, nobody can.)
I did install it correctly as you have described with bleed hole up top.
Regarding the bypassing the heater core, the hoses 25 and 26 become only one hose, connecting one end and the other end.
I CAN NOT SEE WHAT YOU DID LACKING PHOTOS !!!!
Is it wrong to do this?? if just hose replacing heater core, it is ok, if you did other bad things there blocking flow SURE THAT IS BAD.
People say bypassing the heater core takes away a small heat dissipation area. BS, you can hear people tell lies on the internet all day long. why ask this.?
Does it (tell what IT means) contribute to heating up to 210f in the view data of the scan tool?? the scan tool only reads the ECT is that your question?
Beside this, the car runs perfectly, smooth and quiet and also accelerate quickly!
gee some of these cars in horrible shape, even in limphome mode run great so means ZERO to me.(fixkick)
YOU NEVER READ THE MANUAL, IT TELLS YOU TEMPS RUN 215F OR A BIT MORE.
AGAIN THIS IS A REVERSE FLOW COOLANT SYSTEM UNLIKE THE G16.
Themermost is at the front of engine, in the pump housing and sucks cold water.
the ECT is on the rear of the head, NOT SAME place as thermostat so the ECT reads hotter than the themostat by DESIGN
please end the witch hunts on themostat, now.
[/quote]
It stamps 180F / 82C Thermostat only on the box. On the thermostat itself, it just reads 50MM. The old thermostat does not say anything either, it must be the aftermarket one as well.
Does the rockauto ship me the wrong thermostat??
People say only the OEM has stamp of the specific temperatures on their thermostats, the aftermarket ones do not, is it true??( no human on earth can answer how all thermostat are packaged or stamped, nobody can.)
I did install it correctly as you have described with bleed hole up top.
Regarding the bypassing the heater core, the hoses 25 and 26 become only one hose, connecting one end and the other end.
I CAN NOT SEE WHAT YOU DID LACKING PHOTOS !!!!
Is it wrong to do this?? if just hose replacing heater core, it is ok, if you did other bad things there blocking flow SURE THAT IS BAD.
People say bypassing the heater core takes away a small heat dissipation area. BS, you can hear people tell lies on the internet all day long. why ask this.?
Does it (tell what IT means) contribute to heating up to 210f in the view data of the scan tool?? the scan tool only reads the ECT is that your question?
Beside this, the car runs perfectly, smooth and quiet and also accelerate quickly!
gee some of these cars in horrible shape, even in limphome mode run great so means ZERO to me.(fixkick)