(08-31-2019, 08:53 PM)rasmeidirt Wrote:(08-28-2019, 10:46 PM)rasmeidirt Wrote: [quote pid='12044' dateline='1566996177']
After installing the stant thermostat and the seal, I started the car and idle it for the operating temperature. I plugged the scan tool to view the data. Surprisingly, the coolant was 210F?? Why?
What I remember is I did install them correctly. The old thermostat is still work. Only the rubber seal was broken.
[/quote]
Does it has anything to do with the heater core because I did bypassing the heater core???
IF BYPASSED CORRECTLY THAT IS OK, REPLACE CORE WITH HOSE AND OK, IF DONE OTHER WAYS (NO PHOTOS BY YOU) THAT CAN BE WRONG.
FOR SURE MESSING UP ANY OTHER HOSES OR COOLANT PIPES.