4wd light not working.

[Beastcub]

1994 Sidekick JLX  4 door, 4wd, Federal Automatic.
So the previous owner put in a newer 16 spline transfer case (old one was 26). He did not hook up any of the wiring on the two 4wd switches. So when I put it in 4wd (I think) theres no light on the dash. Theres one switch right on top next to the shifter and one on the side.. I cant seem to find any wires going any where into the vehicle to go to the dash light. Each "switch" on the xfer case has only two wires. Any Idea how I can hook this up? Im going to sell this ( ;(  ) vehicle and I want to make sure someone doesnt screw it up but one person asked me how they can tell its in 4wd if theres no light

[Beastcub]

whoa, SOmetimes Im sorry I asked. The vehicle was always been a 4wd vehicle. Just the old transfer case was burned out. I dont see any wires from the main harness going anywhere near the transfer case and someone cut the pigtails off both of them (4wd switches). I didnt realize people butchered these vehicles so much.. Im guessing they removed part of the old harness that goes to the main harness or something..