04-24-2016, 02:40 AM
Good morning sir. Looks like this engine was intervened before. Rod bearings are not stock.
http://www.fixkick.com/bbs2/Suzuki-bbs/e...iew&id=298
These are King brand
The Mains I cannot tell the brand.
http://www.fixkick.com/bbs2/Suzuki-bbs/e...iew&id=299
Did a quick cleanup of piston rods around the where rod and cap meet and pistons 3 & 4 are coded 1H both, and pistons rods-cap are 2H both. Just sharing this with you. Im still in the cleanup process and still need to contact another Machine shop to see if they do mike and measure for free. Do you think this donor crank is salvageable? Anyways I will take it to machine shop and if it is I think im gonna go with the regrind/repolish thing.
Cheers.
http://www.fixkick.com/bbs2/Suzuki-bbs/e...iew&id=298
These are King brand
The Mains I cannot tell the brand.
http://www.fixkick.com/bbs2/Suzuki-bbs/e...iew&id=299
Did a quick cleanup of piston rods around the where rod and cap meet and pistons 3 & 4 are coded 1H both, and pistons rods-cap are 2H both. Just sharing this with you. Im still in the cleanup process and still need to contact another Machine shop to see if they do mike and measure for free. Do you think this donor crank is salvageable? Anyways I will take it to machine shop and if it is I think im gonna go with the regrind/repolish thing.
Cheers.
Sidekick 94, 1.6L Engine 16v
4 spd Auto Tranny
4 Door 2RWD
Puerto Rico
4 spd Auto Tranny
4 Door 2RWD
Puerto Rico