05-14-2016, 11:36 AM
(This post was last modified: 05-24-2016, 03:17 PM by Michtrackerproject.)
yes 3l30,, as far as I know,, trans is out of a 1991 .. recyclers LKQ yard,,
the link I included has the drive plate bolts torque at 54-57 ft lbs,, I did them at (60 ft lbs,) the coverter bolts I did at *(40-42 ft lbs.) and re drilled the drive plate holes to the converter,, old holes where a disaster converter bolts had been loose...
initial test of the replacement trans ,, stall at around 2500 3000 in reverse then the fuel line sprang a leak at the pump housing .. had to drop the tank and I am trying to get the fuel pump bracket, since the high side line has road rot,, from salt belt state...
the link I included has the drive plate bolts torque at 54-57 ft lbs,, I did them at (60 ft lbs,) the coverter bolts I did at *(40-42 ft lbs.) and re drilled the drive plate holes to the converter,, old holes where a disaster converter bolts had been loose...
initial test of the replacement trans ,, stall at around 2500 3000 in reverse then the fuel line sprang a leak at the pump housing .. had to drop the tank and I am trying to get the fuel pump bracket, since the high side line has road rot,, from salt belt state...