Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Stripped bolts on harmonic balancer
#17
id have to see it
was the crank key and slot not damaged.
it should not be off.
but how far. 1/16" inch off?
1 tooth or 1/2 a tooth.?
it can only be right or off 1 tooth
if off 1 full tooth its wrong.



(03-03-2016, 08:04 AM)droflex Wrote: I got the belt on and spun the crank at least two times and then check the marks on both gears.

When the top gear mark is at 12 o'clock the bottom gear mark appears to be slightly off to the right (like 12:01)

I'm pretty sure that if I take the belt off and reset it, that it will be off slightly to the left.

Does that make sense?
http://www.fixkick.com
Reply


Messages In This Thread
Stripped bolts on harmonic balancer - by droflex - 02-23-2016, 09:10 AM
RE: Stripped bolts on harmonic balancer - by fixkick - 03-03-2016, 08:45 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)