01-23-2016, 06:23 AM
My caps from Mouser are not supposed to be here until next week, so I found a local shop that had what I needed.
I have the caps back in and I fixed the traces. Not sure if it's going to work or not, but I'm going to give it a try.
I still have to figure out where A15 is being grounded.
I don't see anything obvious, so I guess I'm going to trace out the wire end-to-end.
Now if this snow would stop, so I can get out there and work on it.
I have the caps back in and I fixed the traces. Not sure if it's going to work or not, but I'm going to give it a try.
I still have to figure out where A15 is being grounded.
I don't see anything obvious, so I guess I'm going to trace out the wire end-to-end.
Now if this snow would stop, so I can get out there and work on it.