Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Need O2 sensor P/N
#4
that is a stock 3 pin
that green thing is to keep out water due to missing pin in a real 4 pin shell.
ok not sure why its 3 pin.
but yes, use the 3 pin sensors, the 4 will fail.. (unless you add a ground)

delphi 10963 old #? ES10047 new.
bosch 15701
denso 234-3014
ntk(NGK) 24617

when you pick one, let me know and will read the full data sheet on it to be sure its correct.
last 3 wire was 1995.
http://www.fixkick.com
Reply


Messages In This Thread
Need O2 sensor P/N - by Azplinker - 12-18-2015, 07:49 AM
RE: Need O2 sensor P/N - by fixkick - 12-18-2015, 09:29 AM
RE: Need O2 sensor P/N - by Azplinker - 12-18-2015, 09:53 AM
RE: Need O2 sensor P/N - by fixkick - 12-18-2015, 10:50 AM
RE: Need O2 sensor P/N - by Azplinker - 12-18-2015, 03:49 PM
RE: Need O2 sensor P/N - by fixkick - 12-18-2015, 10:24 PM
RE: Need O2 sensor P/N - by Azplinker - 12-19-2015, 12:50 AM
RE: Need O2 sensor P/N - by fixkick - 12-19-2015, 01:26 AM
RE: Need O2 sensor P/N - by Azplinker - 12-19-2015, 02:11 AM
RE: Need O2 sensor P/N - by fixkick - 12-19-2015, 02:22 AM
RE: Need O2 sensor P/N - by Azplinker - 12-19-2015, 10:41 AM
RE: Need O2 sensor P/N - by fixkick - 12-19-2015, 11:08 PM
RE: Need O2 sensor P/N - by fixkick - 12-20-2015, 02:01 AM
RE: Need O2 sensor P/N - by fixkick - 12-21-2015, 12:15 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)