hello scott and welcome!
yes the dizzy can bet timed 4 why and run perfect. but only the 1pm way is stock, and the book keeps saying look at rotor over and over all over the book, so if not at 1pm that lays in pitfalls later.
but the short answer, is easy, your aligned below. so
pull dizzy and replant it so the rotor is 1pm and the slot is near middle.
easy huh? clear and mud.....
the mud part is the gear on the dizzy end is spiral cut.so the rotor turns, as you drop it, so back out 13 times, and get it right. 13 teeth IIRC. 1/2 joking 13 times...
hehehehehehe
ps:
http://www.fixkick.com/IGN_timing/16v-procedure.html
yes , gorkys, Cam cog E points down not up. E at 6pm is #1 firing, and rotor at 1PM. asssumes cam timed 100% prefect.
good luck to you.
yes the dizzy can bet timed 4 why and run perfect. but only the 1pm way is stock, and the book keeps saying look at rotor over and over all over the book, so if not at 1pm that lays in pitfalls later.
but the short answer, is easy, your aligned below. so
pull dizzy and replant it so the rotor is 1pm and the slot is near middle.
easy huh? clear and mud.....
the mud part is the gear on the dizzy end is spiral cut.so the rotor turns, as you drop it, so back out 13 times, and get it right. 13 teeth IIRC. 1/2 joking 13 times...
hehehehehehe
ps:
http://www.fixkick.com/IGN_timing/16v-procedure.html
yes , gorkys, Cam cog E points down not up. E at 6pm is #1 firing, and rotor at 1PM. asssumes cam timed 100% prefect.
good luck to you.
http://www.fixkick.com