Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Trouble Installing Dizzy
#7
sorry got lost in your steps.
cam key in E slot? cant see it with lighting in photos.
so it dont start? is that it.?
have a timing light, in tool box? ,its $20 tool.
if yes, you can crank all day (battery willing) and see it fire #1 at 0 on the crank
are the wire laid down, 1,3,4,2, CCW?
if yes, then it will start with test fuel.. now. spark , timed, and wired right, it will start. and run for 3 seconds on test fuel.
for sure.
i can see the cam is timed right, cept e slot.
is compression over 150psi? this passing also proves the cam was timed correctly.
most do 170 cold and way more hot.
92-95 are all same G16b. totally.. in usa.

im sure valve lash is by the book ,right?
http://www.fixkick.com
Reply


Messages In This Thread
Trouble Installing Dizzy - by jimlindenfelser - 11-29-2015, 01:38 PM
RE: Trouble Installing Dizzy - by gorkyb - 11-29-2015, 03:31 PM
RE: Trouble Installing Dizzy - by jimlindenfelser - 11-29-2015, 04:10 PM
RE: Trouble Installing Dizzy - by fixkick - 11-29-2015, 10:28 PM
RE: Trouble Installing Dizzy - by fixkick - 11-29-2015, 11:28 PM
RE: Trouble Installing Dizzy - by jimlindenfelser - 11-30-2015, 02:48 AM
RE: Trouble Installing Dizzy - by fixkick - 11-30-2015, 02:56 AM
RE: Trouble Installing Dizzy - by jimlindenfelser - 11-30-2015, 05:18 AM
RE: Trouble Installing Dizzy - by fixkick - 11-30-2015, 05:23 AM
RE: Trouble Installing Dizzy - by jimlindenfelser - 11-30-2015, 06:29 AM
RE: Trouble Installing Dizzy - by fixkick - 11-30-2015, 08:07 AM
RE: Trouble Installing Dizzy - by jimlindenfelser - 11-30-2015, 08:39 AM
RE: Trouble Installing Dizzy - by fixkick - 11-30-2015, 09:13 AM
RE: Trouble Installing Dizzy - by MaurizioG - 12-03-2015, 12:43 AM
RE: Trouble Installing Dizzy - by fixkick - 12-03-2015, 01:06 AM
RE: Trouble Installing Dizzy - by fixkick - 12-03-2015, 03:35 AM
RE: Trouble Installing Dizzy - by MaurizioG - 12-04-2015, 05:09 AM
RE: Trouble Installing Dizzy - by fixkick - 12-04-2015, 05:53 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)