Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Trouble Installing Dizzy
#2
Hi Jim, to time the distributor at 1 o'clock the crank gear should be aligned with the mark (like you show in your picture) but the cam gear should have the "E" pointing straight down at 6 o'clock (not at 12 o'clock like your picture shows)

Congrats on your rebuilt engine.
1996 Geo Tracker, CAMI, 16 valve, 5sp, 4x4, soft top, 2 door, no a/c
Reply


Messages In This Thread
Trouble Installing Dizzy - by jimlindenfelser - 11-29-2015, 01:38 PM
RE: Trouble Installing Dizzy - by gorkyb - 11-29-2015, 03:31 PM
RE: Trouble Installing Dizzy - by jimlindenfelser - 11-29-2015, 04:10 PM
RE: Trouble Installing Dizzy - by fixkick - 11-29-2015, 10:28 PM
RE: Trouble Installing Dizzy - by fixkick - 11-29-2015, 11:28 PM
RE: Trouble Installing Dizzy - by jimlindenfelser - 11-30-2015, 02:48 AM
RE: Trouble Installing Dizzy - by fixkick - 11-30-2015, 02:56 AM
RE: Trouble Installing Dizzy - by jimlindenfelser - 11-30-2015, 05:18 AM
RE: Trouble Installing Dizzy - by fixkick - 11-30-2015, 05:23 AM
RE: Trouble Installing Dizzy - by jimlindenfelser - 11-30-2015, 06:29 AM
RE: Trouble Installing Dizzy - by fixkick - 11-30-2015, 08:07 AM
RE: Trouble Installing Dizzy - by jimlindenfelser - 11-30-2015, 08:39 AM
RE: Trouble Installing Dizzy - by fixkick - 11-30-2015, 09:13 AM
RE: Trouble Installing Dizzy - by MaurizioG - 12-03-2015, 12:43 AM
RE: Trouble Installing Dizzy - by fixkick - 12-03-2015, 01:06 AM
RE: Trouble Installing Dizzy - by fixkick - 12-03-2015, 03:35 AM
RE: Trouble Installing Dizzy - by MaurizioG - 12-04-2015, 05:09 AM
RE: Trouble Installing Dizzy - by fixkick - 12-04-2015, 05:53 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)