12-05-2015, 09:18 PM
(This post was last modified: 12-05-2015, 09:28 PM by LuisCarlos.)
(12-04-2015, 09:16 AM)fixkick Wrote: maybe? , clean the old ISC and run that?
I cleaned it before install..
it can be adjusted, so if the valve seat is worn, we put just a tiny bit more spring tension with the 5mm screw.
Yes, I adjusted it because after installed it the idle was very high, so with 5 mm I turned a little the hex and the idle was fixed at "800 r.p.m"..
and then works great.
Yes, as if the vitara was new, although it need to do the duty cycle..
Yesterday, the mech call to the head of Santana and gave to him all about rare duck idle, the head will call him next Wednesday, because here in Spain we have some days off, Monday and Tuesday, so only rest wait..
And rest all of us of this TV idle serial..
wish you well and your car.
happy holidays/
And to you and to your wife happy hollidays too..
[quote='fixkick' pid='5132' dateline='1449241384']
revised
http://www.fixkick.com/IDLE-AIR/fastfix.html
I'll study it very well, of course..
Perhaps I'm going to nedd to learn about to do duty cycle by myself, so I'll buy a meter the same that you have..
Thanks, and we in touch after some days, I'm going to a small village and there is not connection to Internet to my laptop, I'll come to Sevilla on next Monday..
Cheers!!