Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
how to communicate Kia Pride 20pin Diagnustig connector
#13
(11-20-2015, 09:54 AM)fixkick Wrote: no, that page is all OBD2.
sorry.
only KIA/Hyundai knows this,

the eprom can be disassembled to machine code.
then reverse engineered, a man/ years work. there.

i bet flash codes work but the lamp is missing in the car, so says the schematics.
id try go get flash codes working first.

thank's

i do the flash cod From this http://www.troublecodes.net/Kia
this work well on my care
Dear fixkick : i think to try go interface MAKER in here and request help them . if them help me !!!
what do you think . Can i use logic analyzer for see signal and know protocol ?
i see the arduino Forum . here https://forum.arduino.cc/index.php?topic=236092.0
post 2 : answer from robtillaart : you need a logic analyzer to determine the baudrate and to see the data.
Reply


Messages In This Thread
RE: how to communicate Kia Pride 20pin Diagnustig connector - by hamed-pc - 11-20-2015, 02:35 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)