really all this number matter
![[Image: Jap-E24-1994plate.jpg]](http://www.fixkick.com/specs/Body-TAGS/Jap-E24-1994plate.jpg)
only this is needed to buy correct parts for any suzuki... just that tag.
see that code 24 that means , your market car. there are 53 more markets. possible
but only half made, world wide.
the tapered rollers are Crush bearings, same as 93 plus real Jeeps use.
and when curshed under 123 to 180lbs (ft/lbs) of force full time, the clearance (play) is about .001" inches, or 2 thou.
if not the all fail fast, the Timken site shows the test done to prove that. its not unknown this.
why not use the correct bearing set?
some shops just pound them on with a cold chistle. and fails soon after.
i can not speak for those ball bearings used on some Jimnys, we dont have them here.
but ill try to cross them later to , timken, if i can , they will tell me all about them...
only this is needed to buy correct parts for any suzuki... just that tag.
see that code 24 that means , your market car. there are 53 more markets. possible
but only half made, world wide.
the tapered rollers are Crush bearings, same as 93 plus real Jeeps use.
and when curshed under 123 to 180lbs (ft/lbs) of force full time, the clearance (play) is about .001" inches, or 2 thou.
if not the all fail fast, the Timken site shows the test done to prove that. its not unknown this.
why not use the correct bearing set?
some shops just pound them on with a cold chistle. and fails soon after.
i can not speak for those ball bearings used on some Jimnys, we dont have them here.
but ill try to cross them later to , timken, if i can , they will tell me all about them...
http://www.fixkick.com