Greetings..and..Transmission

[GeoHacker]

the lever is marked new.
as is the end.
my photos, show it....
all this has to be right or the clutch pedal acts real odd. (non linear action, odd)
goes like this.
http://www.fixkick.com/tranny/clutch/mik...age_7.html

Mine looks right then…I can almost see that second dimple on the lever which I see on mine in that picture of yours.


the center case for sure has a drain hole.
as seen at 6pm here
http://www.fixkick.com/tranny/images/html/image_20.html

My case does not have that slot there like yours, is solid aluminum?


the transfer case will eject huge GL4 lube tilted or worse this... and the bottom drive pinion huge gaping hole there,.... yoke removed.
the 5speed can be pre-0filled, sure. (only at side hole ,never from top)

I think i'll wait then…

---

your on the home run now, 3rd base to home. Congrats !

---

that hole is the TELL TAIL hole.... in bottom of center case, most are packed in grime. but after cleaning it, we go, gee look here, what's this?

Thanks, got the spacer case bolted on, good feeling.

Before this job, output shaft wiggled a little. Wiggles none now.

Before this job, input shaft moved a good bit up down left or right (1-2 mm range)…now is very solid feeling, no slack. (rotates fine too)

So, hopefully might work.

rc