Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Driving 97 kick tach after J18A engine swap
#6
the new j18 cops if using those IDK, here is one example, but not sure yours is same.
has 0v 5v signals that are inverted, seen here best i can tell.
5v turn on coil for dwell charge.
i have no idea what year any Baleno did this change, 1998 ? or otherwise
1998 sport here, if you tap one cop here, it needs 1 to 4 freq upscaler. to work.   The ecu has series resistor driving this line. not sure its value . needs scope seen.
on some J engines there are 2cops in 1 pack and only 1 transistor drives both, for wasted spark application.

[Image: 98COP-unique.jpg]
http://www.fixkick.com
Reply


Messages In This Thread
RE: Driving 97 kick tach after J18A engine swap - by fixkick - 08-31-2020, 03:07 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)