07-25-2020, 07:46 AM
After putting the truck up on the lift and then turning the wheel lock to lock with the engine running I noticed no balking, binding, hesitation, or noises. T
his leads me to believe the issue is with the original struts or strut mounts installed on the truck.
I bought a set of 4 struts and one back shock is leaking. I also bought front strut mounts.
I will replace the left outer CV joint while I am in there.
I'll flush the P/S system and put in new fluid.
I'll post results upon completion.
his leads me to believe the issue is with the original struts or strut mounts installed on the truck.
I bought a set of 4 struts and one back shock is leaking. I also bought front strut mounts.
I will replace the left outer CV joint while I am in there.
I'll flush the P/S system and put in new fluid.
I'll post results upon completion.