08-12-2020, 05:39 AM
Okay, valve cover is off and I see no evidence of sealant having been used on rear-most cam cap (no squeeze-out at all). Looking at the FSM it says to loosen cam caps in sequence and retighten in sequence. Since I’m just removing rearmost cap and not all caps and cam should I be concerned about re-adjusting valve lash? Anything else?
Once again, thanks for all the help. I couldn’t have made it this far without it! There are just so many idiosyncrasies in this vehicle that only first-hand experience can know.
Once again, thanks for all the help. I couldn’t have made it this far without it! There are just so many idiosyncrasies in this vehicle that only first-hand experience can know.