08-11-2020, 10:20 PM
I installed a new FelPro valve cover gasket (no sealant on gasket) and torqued with torque wrench. I feel pretty confidant that the leak is not there but I’ll check it just to make sure.
I’ll remove the rear cam cap and use some RTV on it and re-torque per FSM.
The rocker shaft o-ring at rear of cylinder head is probably the original. Do you see any harm in applying RTV to cover the rocker shaft end? I don’t see how RTV could make its way inside engine.
Is it possible for PCV valve to malfunction letting too much pressure build up and force oil past seals in the dizzy case area?
I’ll remove the rear cam cap and use some RTV on it and re-torque per FSM.
The rocker shaft o-ring at rear of cylinder head is probably the original. Do you see any harm in applying RTV to cover the rocker shaft end? I don’t see how RTV could make its way inside engine.
Is it possible for PCV valve to malfunction letting too much pressure build up and force oil past seals in the dizzy case area?