06-04-2019, 01:06 PM
Well it looks like the harmonic balancer wasnt the issue. I purchased a new one from Low Range Offroad because they were reasonably priced. Seems like it reduced the vibration slightly but there still is a slight vibration, and i checked the motor on my sidekick and i dont see anything similar. Makes me wonder if the crank snout is bent in some way. But i doubt this little vibration is whats throwing the code.
The signal is getting to the computer through the newly ran wire and the signal is clean. The only thing left is the computer but im afraid to touch it. Its going to be hard to find a 2wd manual computer for this x-90. Ill check to see if any of the caps have swelled. but still have the code
The signal is getting to the computer through the newly ran wire and the signal is clean. The only thing left is the computer but im afraid to touch it. Its going to be hard to find a 2wd manual computer for this x-90. Ill check to see if any of the caps have swelled. but still have the code