Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
89 starting issue
#11
(06-11-2013, 02:24 AM)hoffy30 Wrote: Timing belt off and starting over. Looking at the valves with cover off and cam dimple at 12:00 #4 exhaust is at the top of the lobe and #4 intake is at the heel. Crank is torqued and lined up at 12:00. #4 piston is at the top of its stroke. Based on this can I assume that the timing marks are correct before reinstalling the t-belt ? There is no way I could have installed the cam incorrectly is there ? Thanks

oh gosh, you didnt do compression with the throttle at zero did you?
i assumed you read this.
step 7

http://www.fixkick.com/compressiontest.html
http://www.fixkick.com
Reply


Messages In This Thread
89 starting issue - by hoffy30 - 06-08-2013, 12:02 AM
RE: 89 starting issue - by fixkick - 06-08-2013, 01:28 AM
RE: 89 starting issue - by hoffy30 - 06-08-2013, 12:22 PM
RE: 89 starting issue - by fixkick - 06-08-2013, 10:53 PM
RE: 89 starting issue - by hoffy30 - 06-09-2013, 11:11 AM
RE: 89 starting issue - by fixkick - 06-09-2013, 11:56 AM
RE: 89 starting issue - by hoffy30 - 06-10-2013, 12:20 PM
RE: 89 starting issue - by hoffy30 - 06-10-2013, 11:44 PM
RE: 89 starting issue - by fixkick - 06-11-2013, 12:45 AM
RE: 89 starting issue - by hoffy30 - 06-11-2013, 02:24 AM
RE: 89 starting issue - by fixkick - 06-11-2013, 07:44 AM
RE: 89 starting issue - by hoffy30 - 06-11-2013, 12:13 PM
RE: 89 starting issue - by fixkick - 06-11-2013, 09:50 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)