I am working on a 96 tracker specs are below. Right now it is tore down waiting for parts. My neighbor hooked it up to his obd2 It threw four codes at me, two are up and downstream 02 sensors, PO141 and PO135 I knew that was coming because PO clipped the wires, removed the cat and piece mealed a pipe to the exhaust. I have cat and down pipe coming but prob not till next week.
So the other two codes are PO300 random misfires, and the other is PO335 crankshaft position/sensor a circuit malfunction. considering that I cant run the engine at this point. I just want to be prepared for what may be around the corner, what I can test with our running the motor, or if I can do any tests with key on. Or if there is something i can start reading up on. thanks to all. Cheers Bill
So the other two codes are PO300 random misfires, and the other is PO335 crankshaft position/sensor a circuit malfunction. considering that I cant run the engine at this point. I just want to be prepared for what may be around the corner, what I can test with our running the motor, or if I can do any tests with key on. Or if there is something i can start reading up on. thanks to all. Cheers Bill
1996 geo tracker cami vin# 2CNBE1867T693XXXX 2wd 5sp