Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Koyo Wheel bearing
#2
what wheel?
told front.

front wheel, stock and all roller bearings bearings come in packing grease, never use that, (it's there to stop "ON THE shelf rusting", only, it is not rated for disc brake heat of any kind)
case in point:2015
My new Timkens are packed in dry nitrogen gas (no grease) and says on the sealed plastic do not open until ,installed. ending this usage of packing grease forever...

the bearings must never have parts mixed either, cups and cones, as they are perfect machined matching set.

Timken or National bearing co.'s P/N 517009 P/N = Part Number < same number at National bearing co. this is correct bearing as are all bearings listed on ROCKAUTO.com (many there, beck ,nsk, etc, all top brands)
all are crush bearing.

clean them in Stoddard solvent (paint thinner used for oil base house paint) (sold in all hardware stores dirt cheap)
dry them off and pack them, using a zip top sandwich bag.. (super easy trick)

we now learn those ball bearings are only for the new serial VIN , JIMNY.
your car is no Jimny.
http://www.fixkick.com
Reply


Messages In This Thread
Koyo Wheel bearing - by Deadduck - 07-02-2015, 03:33 PM
RE: Koyo Wheel bearing - by fixkick - 07-02-2015, 11:03 PM
RE: Koyo Wheel bearing - by Deadduck - 07-03-2015, 12:06 AM
RE: Koyo Wheel bearing - by fixkick - 07-03-2015, 01:56 AM
RE: Koyo Wheel bearing - by Deadduck - 07-03-2015, 09:33 AM
RE: Koyo Wheel bearing - by fixkick - 07-03-2015, 11:18 AM
RE: Koyo Wheel bearing - by Deadduck - 07-03-2015, 11:30 AM
RE: Koyo Wheel bearing - by fixkick - 07-03-2015, 11:48 AM
RE: Koyo Wheel bearing - by Deadduck - 07-03-2015, 11:55 AM
RE: Koyo Wheel bearing - by fixkick - 07-03-2015, 11:57 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)