Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fitted new engine with loom and ECU... cranks no start
#5
I've fitted the instrument panel and the CEL light comes on straight away. Interestingly it stays on after I remove the key. It gives error code 83 which Google says is "data serial link" "ECU/Immobiliser".

The immobiliser, ignition lock, microchipped key, loom, and ECU all came from a single donor car which was running great and I personally broke up, so the immobiliser should be happy right? I will check all the connections. Been a bit distracted today helping fix my brothers MX5 but hopefully now he'll let me get on with my own car.
Reply


Messages In This Thread
RE: Fitted new engine with loom and ECU... cranks no start - by rcx348 - 10-12-2014, 02:02 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)