08-09-2014, 07:48 AM
check the ohms right off, save tons of pain,
see other post next to yours, hes adding the resistor to fool it.
for now.
94 us supposed to have the probe.
many times the probe inside is packed in carbon, and act like a insulation blanket, and fails to see HOT exhaust.
easy fix. clean it.
it reads 200k ohms cold its, just dirty
if infinity ,its blown.
see other post next to yours, hes adding the resistor to fool it.
for now.
94 us supposed to have the probe.
many times the probe inside is packed in carbon, and act like a insulation blanket, and fails to see HOT exhaust.
easy fix. clean it.
it reads 200k ohms cold its, just dirty
if infinity ,its blown.
http://www.fixkick.com