Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Can you set timing using diag software?
#11
it is, we will have to ask rhinoman why 300 ohms is not right. as it is on all ours.
well, at least we know the engine is at full temp. now.

i forget what car you have, you should do a signature.

like this.
1995,tracker, 2door, M/T 5speed - FED hood sticker?, USA CAR IN Caribbean. <correct me please...
State side Suzuki and trackers
have only 3 ECUs 1995
70EA0 MT fed 4WD
70EBO AT FED 4WD
70EC0 AT CAL 2WD
70EDO AT CAL 4WD.

BELOW THIS IS WORDS
LIKE US MT OR US FED, OR US CAL.
http://www.fixkick.com
Reply


Messages In This Thread
RE: Can you set timing using diag software? - by fixkick - 08-06-2014, 08:05 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)