01-19-2014, 02:37 AM
I have been driving with a jumper. When the symptoms came back so did the 45 error code. I tried unplugging the tps, and put a jumper between the idle switch wires (the bottom 2). Then I connected my DMM at the ECM and wiggled the harness at different points to see if I could recreate an open, but no luck so far. I was thinking of even running new wires to the ECM, but that would be my last resort. Sure could use a data-logging handheld scope about now...
Sidekicks:
Red '95, 2-door, 16V, Automatic
Blue '94, 4-door, 16V, Manual
White '96, 4-door, 16V, Automatic, soon to be 1.9TD-manual
Motorcycles:
'84 GR650 "Tempter"
'79 GS850, shaft drive
Red '95, 2-door, 16V, Automatic
Blue '94, 4-door, 16V, Manual
White '96, 4-door, 16V, Automatic, soon to be 1.9TD-manual
Motorcycles:
'84 GR650 "Tempter"
'79 GS850, shaft drive