01-06-2014, 05:38 PM
Made it home. My buddy drove out and we hauled it back with a Uhaul trailer.
FI fuse was blown, so I replaced it and it started up for about 1 second before blowing again.
I also pulled the computer out and the circuit board looks good (nothing burnt anyway). I have some capacitors kicking around so I will replace those while I have it out.
It's been a long day so I will resume troubleshooting tomorrow.
I have indeed been reading your site for some time now (I have been following your posts on other forums too). I can tell you have put a lot of work into documenting your knowledge and experience. Thank-you, it is a great resource!
FI fuse was blown, so I replaced it and it started up for about 1 second before blowing again.
I also pulled the computer out and the circuit board looks good (nothing burnt anyway). I have some capacitors kicking around so I will replace those while I have it out.
It's been a long day so I will resume troubleshooting tomorrow.
I have indeed been reading your site for some time now (I have been following your posts on other forums too). I can tell you have put a lot of work into documenting your knowledge and experience. Thank-you, it is a great resource!
Sidekicks:
Red '95, 2-door, 16V, Automatic
Blue '94, 4-door, 16V, Manual
White '96, 4-door, 16V, Automatic, soon to be 1.9TD-manual
Motorcycles:
'84 GR650 "Tempter"
'79 GS850, shaft drive
Red '95, 2-door, 16V, Automatic
Blue '94, 4-door, 16V, Manual
White '96, 4-door, 16V, Automatic, soon to be 1.9TD-manual
Motorcycles:
'84 GR650 "Tempter"
'79 GS850, shaft drive