12-23-2021, 04:57 AM
for sure check brakes is most easy by hand feel bearings and brakes drag same time, and is is, remove drum or calipers to see what really drags, even loosen brake zerk to see if
the brake line is under pressure and the cause. also rubber brake lines can crack in side and cause hyrda, lock.
make sure too, (not the pull but in general) the rear piston rod on MC master cylinder has play there, or bad will happen
brakes first,
ok do full laser alignment checks in a real shop, with that setup., it finds them all.
caster, camber, toe-in and Kingpin inclination. and 4corner laser checks for things bent, end to end.
the brake line is under pressure and the cause. also rubber brake lines can crack in side and cause hyrda, lock.
make sure too, (not the pull but in general) the rear piston rod on MC master cylinder has play there, or bad will happen
brakes first,
ok do full laser alignment checks in a real shop, with that setup., it finds them all.
caster, camber, toe-in and Kingpin inclination. and 4corner laser checks for things bent, end to end.
http://www.fixkick.com