12-05-2019, 10:44 AM
Greetings! I have recently started working on my '96 4-door diesel swap again, and have been ordering all kinds of parts online. The rear wheel bearings have me confused though. The axles had collars on them when I took it apart, but the new wheel bearings I ordered (Timken) came without collars and said "new bearing design, replaces collar".
Anybody know what's going on there? The new bearings look the same as the old ones as best I can tell...
Anybody know what's going on there? The new bearings look the same as the old ones as best I can tell...
Sidekicks:
Red '95, 2-door, 16V, Automatic
Blue '94, 4-door, 16V, Manual
White '96, 4-door, 16V, Automatic, soon to be 1.9TD-manual
Motorcycles:
'84 GR650 "Tempter"
'79 GS850, shaft drive
Red '95, 2-door, 16V, Automatic
Blue '94, 4-door, 16V, Manual
White '96, 4-door, 16V, Automatic, soon to be 1.9TD-manual
Motorcycles:
'84 GR650 "Tempter"
'79 GS850, shaft drive