Installed the air pump under the hood where the stock airbox was along with the air control valve. Put the gauges and switches in the dash above the stereo. You have to cut the dash some to get it to fit like so. Used auto hubs as once you put the tracks on you can't get access to the manual hubs.
You can see in the pictures where I ran the wires and hoses into the dash for the gauges through the firewall.
Hope this helps someone if they decide to do this. The airbag kit is a big install. You can to cut and fabricate the entire install custom.
The instructions they send from ATVTracks.net for the sidekick are not good. Hope someone finds this post if they are going to do the install.
thanks.
You can see in the pictures where I ran the wires and hoses into the dash for the gauges through the firewall.
Hope this helps someone if they decide to do this. The airbag kit is a big install. You can to cut and fabricate the entire install custom.
The instructions they send from ATVTracks.net for the sidekick are not good. Hope someone finds this post if they are going to do the install.
thanks.