|
Put in rebuilt engine 2 items...
|
06-10-2019, 01:37 PM
Ok I pulled the cluster and I found that one of the ground traces had shorted and burned. The tach was getting ground intermittently through the throttle cable. I removed the burned trace and put a wire from two of the ground screws to act like the trace. Tach is now solid. Bizarre that it grounded out. Don't know why that happened.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Put in rebuilt engine 2 items... - by hyrific - 06-06-2019, 03:15 PM
RE: Put in rebuilt engine 2 items... - by fixkick - 06-06-2019, 08:11 PM
RE: Put in rebuilt engine 2 items... - by hyrific - 06-08-2019, 05:23 AM
RE: Put in rebuilt engine 2 items... - by fixkick - 06-08-2019, 09:06 AM
RE: Put in rebuilt engine 2 items... - by fixkick - 06-08-2019, 09:11 AM
RE: Put in rebuilt engine 2 items... - by hyrific - 06-10-2019, 01:37 PM
RE: Put in rebuilt engine 2 items... - by fixkick - 07-03-2019, 05:37 AM
|
