Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Toe Adjustment on Tracker
#1
Hello,

Trying to adjust toe / alignment on my 96 tracker, 2WD manual.

I'm having a lot of trouble loosening the locknuts on the tie rod / tie rod ends.
Without these locknuts loosened, I'm unable to adjust the tie rod connector sleeve.
Unfortunately, I only have 2 spanner wrenches that are large enough for the locknuts. Even with the wheel removed, no amount of force I use am I able to loosen the locknuts. I sprayed with WD40 and still unable.
Any advise on how I can loosen the locknuts so I can adjust the toe?

Also - for adjustment, is it okay if the toe is adjusted with the front end off the ground? Or should i make sure the car is down on the suspension before I adjust the tie rod connector sleeve?

Thank You
Sina
Reply


Messages In This Thread
Toe Adjustment on Tracker - by sina27 - 02-22-2019, 03:37 AM
RE: Toe Adjustment on Tracker - by fixkick - 02-22-2019, 04:18 AM
RE: Toe Adjustment on Tracker - by fixkick - 02-22-2019, 04:25 AM
RE: Toe Adjustment on Tracker - by fixkick - 02-22-2019, 04:30 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)