Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Clunk when coming to a stop
#16
Hey kick wanted to get back to you. I was able to source the #15 bushings online as a direct replacement for the Suzuki part number.
The part number is Febest SZAB-010 and is a quarter of the price as the Suzuki part.
They also carry the same rubber bushing #23 and that Part number is Febest SZAB-007 and is a direct replacement as well but about the same price as from Suzuki.
I had the new #15 bushings pressed into the old brackets and everything went back together great.
I figured out you were originally right when you mentioned the locking hubs being a culprit in the clunk.
After replacing the bushings the clunk was still there so i noticed the cv axles have a little movement and that the clucking might be coming from the manual locking hubs we switched over to.
The funny thing is the hubs work and lock fine. I tested the 4 wheel drive system extensively this weekend with much success.
I will swap back over to the auto locking hubs and see if there is any difference.
Reply


Messages In This Thread
Clunk when coming to a stop - by CSUSBgeochem1 - 06-12-2018, 11:38 PM
RE: Clunk when coming to a stop - by fixkick - 06-13-2018, 12:19 AM
RE: Clunk when coming to a stop - by fixkick - 06-13-2018, 01:58 AM
RE: Clunk when coming to a stop - by fixkick - 06-17-2018, 02:20 AM
RE: Clunk when coming to a stop - by fixkick - 07-03-2018, 11:33 AM
RE: Clunk when coming to a stop - by fixkick - 07-03-2018, 11:35 AM
RE: Clunk when coming to a stop - by fixkick - 07-03-2018, 08:36 PM
RE: Clunk when coming to a stop - by fixkick - 07-03-2018, 08:45 PM
RE: Clunk when coming to a stop - by fixkick - 07-04-2018, 12:35 AM
RE: Clunk when coming to a stop - by CSUSBgeochem1 - 07-17-2018, 02:40 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)