Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Replacement COP?
#6
(04-03-2018, 09:36 PM)fixkick Wrote: very good,
make sure the cam belt is ok, and the big bolt 17mm on the crank front end, is set to 94ft/lbs. (in 5th gear, clocked there brakes hard set)
happy trails,
and cheers !

I bought two of these AC/Delco COP's off eBay for my 1.6L. The appear 100% authentic and my engine is running great with the new COP's (and also new NGK wires and plugs and the new camshaft sensor). Not bad for $56 for two new COP's. The link to the eBay listing is in my first post on this thread. The Techron injector cleaner probably played a part as well.

I will check the torque on the crank front end bolt for correct torque. I will also check the cam belt (it was replaced at 134,000 and I am at 145,000 now).
Cheers!

Joe Tracker
Reply


Messages In This Thread
Replacement COP? - by Joe Tracker - 04-02-2018, 08:57 AM
RE: Replacement COP? - by fixkick - 04-02-2018, 09:33 AM
RE: Replacement COP? - by fixkick - 04-03-2018, 03:27 AM
RE: Replacement COP? - by Joe Tracker - 04-03-2018, 12:41 PM
RE: Replacement COP? - by fixkick - 04-03-2018, 09:36 PM
RE: Replacement COP? - by Joe Tracker - 04-07-2018, 06:27 AM
RE: Replacement COP? - by fixkick - 04-07-2018, 07:15 AM
RE: Replacement COP? - by Joe Tracker - 04-08-2018, 02:31 AM
RE: Replacement COP? - by fixkick - 04-08-2018, 08:08 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)