1.6 Swap Injecton problem

[loe92]

This 1.3 map sensor so matches my 1.6 ECU?

http://www.ebay.it/itm/Draper-Vacuum-and...SwlfxXGYjr

Do i need a tool like this to test the vacuum?

I attach a picure of the tag too. ( Is the best that i can do by night)

I'll wait for the 2 march to know if i have to replace the distributor and what distributor i need.

And just to explain.

If i use the car how is now with all the sensor plugged, when i stay at idle and i open the trotthle i hear a big hesitation around 1000 rmp but then the engine goes up with no big problems, when i drive the car if i am not soft with the accelerator pedal the car boggles in a terrible way ( i don't know if this is the right term) and is un-drive able.
As i mention in the first post, i tried to disconnect all the sensor on the car but the one that make the difference is the ECT sensor and the car has no more this hesitation (because it goes in LIMPHOME mode and is superich).