Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CV shafts
#1
So, from past experience vehicles, there is a nut on the outboard end of the shaft and it had a divot punched in to keep it in place. But, i'm gathering there is a c clip somewhere on the shaft?

i looked at the fix-kick diagram and didn't even see a nut on the end of the shaft, also, don't remember there being one their either.

am i missing something?(about to tear it all down and find out anyways, but yeah)

(09-08-2013, 06:45 AM)swansen Wrote: So, from past experience vehicles, there is a nut on the outboard end of the shaft and it had a divot punched in to keep it in place. But, i'm gathering there is a c clip somewhere on the shaft?

i looked at the fix-kick diagram and didn't even see a nut on the end of the shaft, also, don't remember there being one their either.

am i missing something?(about to tear it all down and find out anyways, but yeah)

yes, nvm... using the eyes and looking things over is always a good idea... no such nut, and i see where the snap ring goes.
Reply


Messages In This Thread
CV shafts - by swansen - 09-08-2013, 06:45 AM
RE: CV shafts - by fixkick - 09-12-2013, 04:06 AM
RE: CV shafts - by swansen - 09-12-2013, 11:03 AM
RE: CV shafts - by fixkick - 09-12-2013, 12:08 PM
RE: CV shafts - by swansen - 09-12-2013, 12:55 PM
RE: CV shafts - by fixkick - 09-14-2013, 12:05 AM
RE: CV shafts - by swansen - 09-14-2013, 12:40 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)