08-20-2016, 03:01 AM
questions, the injectors were professionally cleaned
in that the 10 micron screens inside were back flushed,? using ultrasound is top way.,
all barn founds, the screen are full of junk, packed. or 3/4s packed allowing start and die.
they only need to flow at 10hp flow rates to idle.
keep in mind cold starts use a crude rich fuel mix , cranked, this can hide partially clogged injectors, until it runs , goes lean and starves , in idle mode.
in that the 10 micron screens inside were back flushed,? using ultrasound is top way.,
all barn founds, the screen are full of junk, packed. or 3/4s packed allowing start and die.
they only need to flow at 10hp flow rates to idle.
keep in mind cold starts use a crude rich fuel mix , cranked, this can hide partially clogged injectors, until it runs , goes lean and starves , in idle mode.
http://www.fixkick.com