05-17-2018, 07:38 AM
if you look careful here, that post there at 2pm can be hooked up to spark wires to check spark , to a spark plug, (for next time it ends check this)
and any scan tool to see if the CMP sensor is dead.
try to keep the clamp bolt base slot seen there centered after the drop. if dont wrong you may not get to 5deg, BTDC or as the hood sticker states, (under hood look up see?)
and any scan tool to see if the CMP sensor is dead.
try to keep the clamp bolt base slot seen there centered after the drop. if dont wrong you may not get to 5deg, BTDC or as the hood sticker states, (under hood look up see?)
http://www.fixkick.com